Showing 1–24 of 45 results

Show sidebar

JR New Alligator Shear Range

Rated 5 out of 5
The JR New Alligator Shear Range at Just-Recycling consist of light duty shears - medium duty shears - and heavy duty alligator shears for cutting shearing cropping cleaning and reducing scrap metal both ferrous and non ferrous and many other recyclable materials both reliably and cost effectively.

AKROS HENSCHEL CIC600 Inclined Shear:

The used AKROS Henschel CIC600 inclined scrap metal shear is in good condition and will be available mid 2019 ex site Europe.

COPEX 800T LIDEX SHEAR BALER

The used Copex Lidex side compression scrap metal shear baler baler shear is in good condition can be seen running and is available immediately ex site Europe.

KYOTO CI 2000 Inclined Scrap Metal Shear

Rated 5 out of 5

The new KYOTO CI 2000 inclined scrap metal shears are available ex works Europe. With a throughput capability of circa 15 - 30 t/p/h the KYOTO CI 2000 inclined scrap metal shears can be supplied with one or two shear cylinder subject to the machines installation.

KYOTO CI 1500 INCLINED SCRAP METAL SHEAR

The new KYOTO CI 1500 inclined scrap metal shear is available ex works Europe.

With a scrap metal shearing throughput capability of circa 10 - 20 t/p/h the KYOTO CI 1500 inclined scrap metal shear can be supplied with one or two shear cylinders subject to the machine's installation.

LEFORT 900 ALLIGATOR SHEAR

Rated 5 out of 5

Offered as a fully factory refurbished Lefort 900 alligator shear the recycling machine is available on a eight week delivery schedule and come complete with 3 months warranty.

MOROS HF30 ALLIGATOR SHEAR

The used MOROS HF-30 alligator shear is in good condition, can be seen running and is available immediately ex works UK.

Complete with 30Hp 22Kw 3 phase electric drive motor the MOROS HF-30 alligator shear has a 750mm long cutting blade with 200 tonnes of shearing force.

Z TAURUS C662 SHEAR BALER

The used Taurus C662 scrap metal shear baler baler shear is fully refurbished in excellent condition and can be seen working and is available immediately ex works UK.

Delivered new in 2008 the Taurus C662 scrap metal shear baler, baler shear has a 6.1m long charge diesel Volvo 300Hp engine .

Z ORWAK 3800 WASTE BALER
Close

Z COPEX CVF630 TRANSPORTABLE SHEAR BALER

Delivered new in 2011 the used COPEX CVF 630 transportable shear baler has circa 6,000 worked hours and is offered for sale refurbished ex works Europe.

The Copex 630 Shear Baler has a 5,600mm long charge box, 630 tonnes shearing force, 120 tonnes hold down clamp and pusher and 240 tonnes of folding force on the lids.

COPEX 1000T SHEAR BALER

The used Copex 1000 ton side compression scrap metal shear baler is in good condition and available immediately ex site UK.

Powered by 4 x 90Kw electric motors the Copex 1000 ton side compression scrap metal shear baler has a 600mm wide throat and an 6m long by 2m wide charge box.

AKROS 1000T SCRAP METAL SHEAR BALER

The used AKROS CIB 1000-8L scrap metal shear baler is in good condition and available immediately ex works Europe.

Delivered new in 2005 the used AKROS CIB 1000-8L scrap metal shear baler is a static electric machine with 460Kw drive.

AKROS 800T INCLINED SCRAP METAL SHEAR

The used AKROS model CIC 800 - 10 inclined scrap metal shear is in good condition and available immediately ex works Europe.

Delivered new in 2005 the used AKROS 800 CIC 10 inclined scrap metal shear is a static electric drive machine with 4 x 90Kw motors.

Z TAURUS 540 SHEAR BALER

The used Taurus 540 scrap metal processing shear baler, baler shear is a fully refurbished machine offered for sale with a warranty ex works Europe.

TAURUS 900 SHEAR BALER

The used Taurus 900 scrap metal processing shear baler, baler shear is in good condition and available immediately ex works Europe.

Delivered new in 2002 and subject to a full refurbishment program in 2012 the Taurus 900 scrap metal processing shear baler, baler shear is a static electric drive machine.

LEFORT 450 MOBILE SHEAR BALER

The 1999 used Lefort 450 mobile scrap metal baler shear is in fair to good condition and is available immediately ex site UK.

The Lefort 450 scrap metal baler shear is mobile on a tri - axle trailer and complete with operators cabin and a 5m charge box and has a registered 14,300 worked hours.

Z LEFORT 500 MOBILE SHEAR BALER

Complete with 5m charge box, hold down clamp and radio control the 500 Lefort mobile shear baler, baler shear is ideal for shearing and baling loose light iron, mild steel plate, RSJ's, angle iron, steel pipe, motor vehicle bodies and non ferrous materials.

Z LEFORT 1000T SHEAR BALER

The used Lefort 1000 ton shear baler is in good condition and is available immediately ex site UK.

Delivered new in 2010 the used Lefort 1000 wing box scrap metal shear baler was subject to a full factory refurbishment in 2014.

LINDEMANN 600 TON 60036 SIDE COMPRESSION SHEAR BALER

The used Lindemann 600 side compression baler shear is in good condition can be seen working ex site UK and is available immediately.

With a shearing force of 600 tons a 5m charge box side compression and hold down clamp the electric driven Lindemann 60036 side compression baler shear is complete with 1000 KVA Cummins diesel generator.

Z MOROS HF30 ALLIGATOR SHEAR

The MOROS HF-30 alligator shear has a hydraulic hold down clamp and comes complete with front mounted anvil for material compactor and the Moros HF30 alligator shear is a designated “ heavy duty” machine.

JR DTX 680 Light Duty Alligator Shear

Rated 5 out of 5

Our new JR DTX 680 Light Duty Alligator Shear are available with a single and three phase electric drive motor and have a 680mm long blade with 55 tonnes of shearing force.

JR DTX 400 Medium Duty Alligator Shear

Rated 5 out of 5
Our new JR DTX medium duty 400 alligator shears are available with a three phase electric drive motor and have a 406mm long blade with 106 tonnes of shearing force.

JR DTX 4600 Heavy Duty Alligator Shear

Rated 5 out of 5
Our new JR DTX 400 heavy duty alligator shears are available with a three phase electric drive motor and have a 406mm long blade with 106 tonnes of shearing force.

JR DTX 600 Heavy Duty Alligator Shear

Rated 5 out of 5

Our new Heavy Duty JR DTX600 alligator shears are available with a three phase electric drive motor and have a 610mm long blade with 172 tonnes of shearing force.

JR/DTX 340 Light Duty Alligator Shear

Rated 5 out of 5

Our new JR DTX340 light duty alligator shears are available with either single or three phase electric drive motors and have a 340mm long blade with 50 tonnes of shearing force.