X Tyre Shredding Recycling Plant

SOLD

The used car and truck tyre  shredding recycling plant model number TP3000S/TS100 Tyre Shedders and De Beader is in very good condition can be seen running and is available immediately ex site UK.

The used car and truck tyre  shredding recycling plant produces a steel free 20mm rubber product for the equestrian market and further processing  and contains the following equipment –

• DB30 Tyre De Beader –
• In Feed conveyor –
• Twin Shaft Pre Shredder –
• Out feed conveyor –
• 4  Shaft sizing shredder –
• Overband Magnet with steel support structure
• Discharge stacking conveyor with drum magnet.

The tyre recycling shredding plant comes complete with a commercial truck tyre de beader and this allows the tyre recycling shredding plant to comfortably process both car and commercial vehicle truck tyres.

Recently refurbished knife and blades in both the twin shaft pre shredder and the 4 shaft sizing shredders together with very low operating hours ensure the tyre recycling shredding plant  will stand any on site demonstration and inspection

Tyre De Beader Data:

• Model:  B30
• Motor:   18.5kW – 400V, 3 phase
• Tyre De Beader Dimensions:
• Length:  3,980 mm
• Width:  2,015 mm wide
• Height:  1,698 high
• Weight:   2,400kg
• Cycle Time:  approx. 90-120 second to pull both beads from super singles
• For pulling both beads from truck and super single-tyres
  (Required on all truck tyres over 17.5 inch rim and before pre-shredding)
  Pull both beads together or one at a time on broken carcasses
  Mechanical screw operation for speed and reliability

In Feed Conveyor to Pre Shredder Data:

• 1 x trough conveyor
• Belt Width 1,200mm
• Centre of pulleys 9,500 mm inclination max. 30˚
• Drive unit Helical-Worm Geared Motor 2.2 kW. Make SEW
• Position: Head pulley, right side
• 400 Volt, 50 Hz, IP 65 insulation class F
• Belt speed = 0.8m/s

Pre Shredder Data:

• Model:    TP300S
• Motors:     2 x 37 kW
• Cutter Opening: 1,235 mm wide x 990 mm long
• Blade Thickness:   50 mm
• Shaft Speed:   8 rpm
• Weight approx:  5,000kg
• In feed hopper
• Support stand
• Worked Hours 1,814

Out Feed Conveyor to 4 Shaft  Shredder Data:

• Conveyor Type:  Trough belt
• Belt Width:   650mm
• Drive Motor:   2.2 kW
• Voltage:  230/400 Volt, 50 Hz, IP 65 insulation class F
• Belt Speed:  0.8m/s

4 Shaft  Shredder Data:

• Make:  TS100
• Model:  4 shaft
• Motors:   2 x 15Kw / 2 x 37Kw
• Cutting Chamber:  1,040mm x 1,200mm x 700mm
• Screen:  20mm
• Machine Dimensions:
• Length:  3,200mm
• Width:  1,700mm
• Height:  3,110mm
• Weight:  circa 8,000Kg
• Steel Support Structure
• In Feed Hopper
• Worked Hours 1,790

Discharge Conveyor Data:

• 1 x trough conveyor
• Belt Width 650mm
• Centre of pulleys 5,500 mm inclination max. 20˚
• Drive unit Shaft mounted geared motor 3.0kW
• Position: Head pulley, right side
• 230/400 Volt, 50 Hz, IP 65 insulation class F
• Belt speed = 0.8m/s
• Magnetic Pulley – RareEarth

Overbelt Magnet Data:

• 1 x suspended Permanent Over band Magnet. Type: OCP2280E
• Magnet dimension 800 x 560 x 215mm
• Drive Geared motor 1.1 kW with flexible coupling
• 230/400 Volt, 50 Hz, IP 65, Make: Danfoss Bauer
• Discharging speed = 1,37 m/s
• Weight approx. 750 kg